Description
The 9,000 lb L2910 2 post lift is a versatile and robust car lift designed to accommodate various vehicles, including cars and trucks.
It has a lifting capacity of 9,000 lbs, making it suitable for a wide range of applications. The 2 Post Lift is equipped with a 220V or 110V power supply option, providing flexibility in installation based on the available electrical infrastructure.
- Customer MUST have forklift or tractor to unload the freight. Package weights total 1400 LBS. If Customer does not have either tool to unload.
Features:
- 220v Or 110v 60hz 1ph 3hp Motor
- Come With Adjustable Pads. Truck Adapters Are Included
Safety Mechanism:
- double Point Safety Lock Release
- automatic Arm Lock Restraints
- relief Valve Built In Power Pump To Prevent Overloading
- door Guards Protection Rubber
- up-limit Switch To Protect Cylinders Working Stroke Used In Safe Length Scope
- heavy Duty 5/16″ Diameter Cable And 4.56″ Pulley Reduce High Stress On Synchronization Process And Increase Cable Life
- stiffened Base Plate 15/32″ Thickness
- ultra High Molecular Self Lubricating Nylon Slider Ensures Carriage Smooth Moving Up And Down
- anchor Bolts/mounting Hardware Include
- Control System
Control System:
- lifting Operation By Pressing “Up” Button On Motor
- manual Lowering Operation By Pressing Lever
- relief Valve Built In Power Pump To Prevent Overloading
- lifting Capacity: 9,000 Lbs
- the Overall Height 145 21/32″
- the Overall Width 133-1/4″
- column Width 10.59″
- distance Between 2 Post 106-5/16″
- Overall Width 131-1/2″
- base Width 14-9/16″
- column Thickness Of Steel 11/64″
- carriage Thickness Of Steel 3/16″
- arms Thickness Of Steel 15/64″
- front Arm 29.9″-47.2″
- rear Arm 29.9″-47.2″
- min Pad Height: 3-7/8″
- lift Height Max: 74-13/16″
- drive-thru Width Clearance: 99-7/32″
- time To Full Rise: 55 Sec
- shipping Weight: 1370 Lbs
Before Installing Your Auto Lift, Check The Following:
Lift Location: Always Use Architect’s Plans When Available. Check Layout Dimension Against Floor Plan Requirements Making Sure Adequate Space Is Available. Your Lift Requires A 220v Or 110v , 30amp, Single Phase, Grounded Electrical Source. There Should Be Room Enough To Operate The Lift In A Safe Manner And Without Restrictions.
Overhead Area: The Area Where The Lift Will Be Located Should Be Free Of Overhead Obstructions Such As Heaters, Building Supports, Electrical Lines, Doors, Lights, Etc.
Floor Area: Visually Inspect The Site Where The Lift Is To Be Installed And Check For Cracked Or Defective Concrete.
Floor Requirements:
a level Floor Is Suggested For Proper Installation And Level Lifting. Small Differences In Floor Slopes May Be Compensated For By Proper Shimming. If A Floor Is Of Questionable Slope, Consider A Survey Of The Site And/or The Possibility Of Pouring A New Level Concrete Slab.
- New Concrete Must Be Adequately Cured For At Least 30 Days.
- Do Not Install Auto Lift On Any Asphalt Surface Or Any Surface Other Than Concrete.
- Do Not Install Auto Lift On Expansion Seams Or On Cracked Or Defective Concrete.
- Do Not Install Auto Lift On A Second/elevated Floor Without First Consulting Building Architect.
- Do Not Install Auto Lift Outdoors Unless Special Consideration Has Been Made To Protect The Power Unit From Inclement Weather Conditions.
Concrete Specifications:
All Models Must Be Installed On 3,000 Psi Reinforced Concrete Only. Additional Concrete Requirements Will Vary By Lift.
- 8,500 Lbs – 10,000 Lbs Lifts: 4? Minimum Thickness
- 11,000 Lbs – 15,000 Lbs Lifts: 6? Minimum Thickness
Equipment Required For Unloading:
- forklift Or Tractor Is Required From Customer For Unloading The Product.
- Feel Free To Ask Us Any Question Or Concerns. (We Will Get Back To You Within The 24 Hrs).
- We’ll Try Our Best To Reply Within 24 Hours On Working Days. (48 Hours On Weekend Or Holidays)
Specifications:
- Brand: XINKONG
- Material: alloy steel
- Color: blue
- Item weight: 1400 pounds
- Wheel type: rubber
- Load capacity : 9000 pounds
- Number of wheels: 3
- Voltage: 220 volt